Pro Shank Tether in black with chrome connector. Used to tether tools
Pro Shank Tether - Image 2
Pro Shank Tether - Image 3

Pro Shank Tether

SKU: TT-SHANK-P
WLL: 2.5 kg

£0.00

The Pro Shank Tether is a semi-permanent tool tether for all tool handle shapes and configurations.

SKU Size Quantity
TT-SHANK-P-S Small
TT-SHANK-P-M Medium
TT-SHANK-P-L Large
TT-SHANK-P-PP Pro Pack
TT-SHANK-P-UP Utility Pro Pack
SKU: TT-SHANK-P Categories: ,

The Pro Shank Tether is a semi-permanent tool tether for all tool handle shapes and configurations.

• Semi-permanent
• Easily retrofit existing tools

 

AVAILABLE IN THE FOLLOWING:

Large – Sleeve 15cm / Ø 20-55mm
Medium – Sleeve 13cm / Ø 20-45mm
Small – Sleeve 10cm / Ø 15-35mm
Pro Pack – 20 x small, 20 x medium, 10 x large Semi-permanent
Utility Pro Pack –  200 x small, 200 x medium, 100 x large Semi-permanent

WLL 2.5kg

All-in-one safety.

All Leading Edge tool tethering products are tested and certified in accordance with EN364-1992 test methodology. It conforms to the provision and scope of our testing and quality procedures as per the PPE Regulations (EU)2016/045, where applicable and relevant within the fit for purpose design parameters.

Safety Factors.

All certified Leading Edge products boast a whopping 47x safety factor. We purposefully over engineer our products to have greater resilience than a real world scenario would require — this gives them superior in-service lifespan and fully 3guarantees your safety in daily use.

Testing Methods.

All tool safety equipment classified as UKCA approved must surpass two rigorous testing methods.

Static Test.

We attach the product to an anchor point and apply pressure by hanging a weight from it. A product only passes if it is able to withstand the load for a minimum of three minutes without signs of damage or weakening.

Dynamic Drop Test.

We attach the product to an anchor point and apply pressure by hanging a weight from it. A product only passes if it is able to withstand the load for a minimum of three minutes without signs of damage or weakening.

Every item that leaves our factory comes with full documentation containing technical specifications, serial numbers, testing methods, working load limits and inspection results proving it has passed all necessary requirements for work at height.